Loading... Please wait...

Some Supported Networks


HP Unlocking Instructions

  • One Step Direct Checkout

  • 100% Genuine Unlock Codes

  • 100% Money Back Guarantee

  • No Need To Create An Account

  • Genuine Codes Direct From Database

All Network Supported.


Processing Time

Enter Phone Model

Country And Network



HP iPAQ Mobile Unlocking Instructions

iPAQ 6320, 6325, 6510, 6515
1. Power on phone with a non-original SIM card inserted.
2. Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has previously attempted to unlock with the wrong code)
3. Enter your unlock code when prompted by the phone
4. Press OK
5. A success dialog will appear. Press OK

If the unlock code is incorrect, an error dialog will appear. After pressing OK, the user has to re-enter the unlock code after a delay.

iPAQ 6315
1. On the Today screen, tap Start > Settings
2. Tap the Phone band icon and choose " North America" or "Europe" or "Asia" phone band depending on where you are
3. Tap the keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys
5. Tap the blank area below the band selection box to open the unlock tool
6. Tap Shift and then Ctl to disable the keys
7. Enter the unlock code you received from us, and tap OK when done
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:

"Unlock successful" The device is now unlocked and should continue booting.
"Unlock failed due to incorrect code" You have three attempts to enter the unlock code. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
"Your phone is not ready for unlocking" This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.